kitchen lighting using energy efficient led light bulbs

by:C.E.T     2020-01-09
The basic lighting design guide always describes the light layered to achieve the effect you want.
For the kitchen, this means combining general ambient lighting with mission lighting and focus lighting.
With energy-saving bulbs, you can change the aesthetics of the kitchen and reduce the energy consumption per month. Using LED (
Bulbs provide you with energy-saving and energy-saving bulb optionsCFLs)don\'t provide.
In order for CFLs to be able to consistently print life time ratings on packaging, they must be kept for at least 15 minutes at a time.
If not, they will consume it at a faster rate.
CFLs also need this time to warm up to their full brightness.
On the other hand, the LED bulb is turned on immediately and does not need to be left on to keep it fully rated (
Usually 50,000 hours).
Not only is the LED bulb long in life, but also energy saving, you can also choose the floodlight and spotlight.
Without relying heavily on the fixtures in which it is placed for light focusing, CFLs cannot produce a focused light.
With more bulb options, it\'s easier to get the lighting you want.
Start with the task area.
In terms of function and decoration, good kitchen lighting includes environment lighting and task lighting.
Mission lighting is used to illuminate work areas such as counters, sinks, and desktops.
The lamps and lanterns are installed near the task area, and the lighting should be bright and shadow-free.
Installing lights under the cabinets above the kitchen counter is a great place to place some task lighting.
LED options include light strips and flexible LED light strips, which are mounted at the bottom of the cabinet and remain hidden while providing useful task lights, as well as lamps that enhance the appearance of stone countertops.
In the absence of overhead cabinets, such as the kitchen island, light can be brought to the vicinity of the work area using hanging chandeliers.
In general chandelier should in from floor about 5 feet 6 inch of place suspension (based on a 36-
Kitchen Island inch high)
Kitchen dining area lights should be in from floor about 5 feet 4 inch the suspension or in from desktop 30 to 36 inch between suspension.
The fixture chosen should also be 12 inch narrower than the top of the table.
If it is not possible to hang the lights, then the light can be projected from the ceiling using track or embedded lighting.
The most effective bulb for track or embedded lamps is the directional light that glows in a specific direction.
Many of these fixtures use MR16 bulbs.
Find an LED MR16 bulb that produces a flood pattern and a light bulb that does not have a hard defined beam pattern, otherwise it will cast a hard shadow, which is a bad choice for the mission light, but great for accent lighting.
The PAR30 lamp is usually used in recessed jars and is easy to find as an LED bulb.
Once the task lighting is selected, it is time to choose the lamps that provide the environment lighting.
Environment light is the ordinary light used in the kitchen for leisure activities.
It fills in shadows, reduces contrast, illuminates the vertical surface and gives a brighter feel.
A kitchen with light-colored surfaces and many Windows has a lot of ambient light during the day, but once the sun sets, the kitchen must rely on fixtures that produce general lighting.
If you use fluorescent tubes in your current kitchen, you can replace them with LED bulbs.
These LED tubes are used longer.
An average of 50,000 hours, if you calculate it for 12 hours a day, the rated life is equivalent to about 10 years of use.
If you often ignore replacing your used fluorescent tube, this is especially great, and the fluorescent tube will consume power even if it burns out.
Choosing a warm color temperature between 3000K and 5000K creates an attractive light.
LED sconces is also a great way to add ambient lighting to the kitchen.
The lights installed on the wall are usually up, but some fixtures glow up and down.
They usually installation in from floor 5 feet 6 inch far of sconce center.
If you have space between the top of your cabinet and the ceiling, you can use the LED strip or the light strip to bounce the lights on the ceiling to add more general lighting.
Emphasizing lighting is the reason for bringing extra dimensions to your space.
It is used to highlight certain objects in the room to a minimum, increasing the elegance of the space.
LED spotlights can directly illuminate artwork and architectural details in the kitchen.
LED strips or flexible LED strips can be embedded in the display cabinet to illuminate fine porcelain, glassware or other collectibles.
With proper lighting, any old kitchen can be upgraded to not only a new cooking space, but also a central area for leisure venues.
The use of LED bulbs when upgrading will also benefit the environment and your pocket manual.
Custom message
Chat Online
Chat Online
Chat Online inputting...